嘉實多@CASTROL OPTILEB HY46

詳細(xì)內(nèi)容：CASTROL OPTILEB HY32/46/68,CASTROL OPTILEB HY 32/46/68　詳細(xì)說明　 CASTROL OPTILEB HY32/46/68 Fully synthetic hydraulic oils, physiologically safe, USDA H1 registration DESCRIPTION CASTROL OPTILEB® HY are hydraulic oils, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. CASTROL OPTILEB® HY hydraulic oils comply with and even exceed DIN 51524 part 2 for HLP hydraulic oils. APPLICATIONS · For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging · For hydraulic systems in production, filling and packaging machines ADVANTAGES · OPTITEC® - OPTIMOL technology · physiologically safe, USDA H1 registration · tasteless and odorless · no foam formation · excellent viscosity/temperature behavior · good water separation ability · miscible with mineral oil · disposal like mineral oil NOTES FOR USE · Please observe the viscosity specified by the manufacturer. · Good compatibility with conventional sealing materials. · When changing over from mineral oil to CASTROL OPTILEB® HY oil filters have to be monitored and - if necessary - exchanged or cleaned. CASTROL OPTILEB® HY Technical data Unit Value Test method CASTROL OPTILEB® HY - 32 46 68 - Article no. - 05350 05351 05352 - Color - transparent, clear visual Base - polyalphaolefin - ISO viscosity group - 32 46 68 DIN 51519 Density at + 15°C/+ 159°F kg/m3 829 834 836 DIN 51757 Kin. viscosity at + 40°C/ + 104°F at + 100°C/ + 212°F mm2/s 30.5 5.81 43.6 7.43 65.6 10.28 DIN 51562 Viscosity index - 136 136 143 DIN ISO 2909 Pour point °C °F < - 50 < - 58 - 48 - 54.4 - 45 - 49 DIN ISO 3016 Flash point °C °F 219 426.2 242 467.6 242 467.6 DIN ISO 2592 Copper corrosion - 1a 1a 1a ASTM D-130 Steel corrosion - 0 0 0 DIN 51585 FZG test (A/8.3/90) Failure load stage - > 12 DIN 51354 Vickers pump test - passed DIN 51389 1 mm2/s ^ 1cSt These technical data are based on average test results. Minor deviations may occur from case to case. For further product information please contact the Technical Service of Castr